| Customization: | Available |
|---|---|
| Barriers Type: | Electronic Repeller |
| Effectiveness: | Long-term |
|
Still deciding? Get samples of US$ 8.68/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
|
|
|
Battery Instructions
Step 1. Initially, deplete the device's power (built-in batteries) to the minimum: when the red low-voltage indicator blinks or the device does not respond upon activation.
Step 2. Connect the device to any standard USB output, and use the provided USB cable to charge the device for 6-12 hours:
2.1: Due to the variance in USB power and battery activity, it is normal for the red indicator to continue blinking after more than 12 hours of charging (the device can function normally even if charging is stopped). Simply install and use the device in its normal operational scenario.
2.2: If the charge time is notably less than 6 hours but the indicator shows a full charge (not flashing), please continue charging for at least 6 hours.
Step 3. If the red indicator persists in flashing or the device ceases to function without response after some usage, repeat
Step 2., charge for 6-12 hours. After approximately 3-5 charge and discharge cycles, the batteries' performance stabilizes and returns to normal.
Step 4. Adhere to the three steps mentioned above to fully optimize the batteries' performance within the device.
SUITABLE ENVIRONMENT:
Avoid using this device in extreme environmental conditions.
Such conditions may damage critical components or cause malfunctions.
Solar panel: Ensure air salinity does not exceed 3%; Operating temperature: -20ºC ~ +85ºC
Ni-Cd battery applicable temperature:
-10ºC ~ +45ºC (Note: Above -10ºC ~ +50ºC charging is not possible, and above -20ºC ~ +60ºC power cannot be output)
Ni-MH battery applicable temperature:
Operating Temperature Range: Aosion International (Shenzhen) Co., Ltd.
|
|
|
|
|
|
|
|
){kind=link}