| Customization: | Available |
|---|---|
| Barriers Type: | Electronic Repeller |
| Effectiveness: | Long-term |
|
Still deciding? Get samples of US$ 8.68/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
|
|
|
Wild dogs pose a severe threat to livestock, leading to potential fatalities and injuries, resulting in considerable economic losses and animal welfare concerns.
In certain regions, wild dogs can have a detrimental impact on wildlife and may intrude into your garden, backyard, or home, causing potential damage to your property. This dog repeller is your solution to keeping wild dogs at bay.
1. A powerful ultrasonic signal deters animals. They avoid the vicinity due to the irritating ultrasonic noise, which is triggered when they enter the area. This ensures that animals do not become accustomed to the sound, thus enhancing its deterrent effect.
2. Intense flashing lights scare animals away. The strong flashes are activated upon an animal's approach, effectively frightening them and encouraging retreat.
Button "FREQ" Position:
·13.5kHz-17.5kHz Efficiently repels smaller creatures such as mice, small rodents ...
·15.5kHz-19.5kHz Designed to repel larger animals like big dogs, foxes ...
·19.5kHz-23.5kHz Targets and repels smaller dogs, cats, birds, bats ...
·Powerful flashing lights
·All functionalities activated, sweeping frequency from mode 1 to mode 2 to mode 3, along with strong flashing lights.
Battery Instructions
Step 1. For initial use, let the device operate until the built-in batteries are nearly depleted: indicated by a blinking red low-voltage light or no response upon activation.
Step 2. Connect the device to a standard USB output, and charge using the included USB cable for 6-12 hours:
2.1: Due to varying power and voltage outputs from different USB sources and battery activities, the red indicator may continue to flash beyond 12 hours of charging. The device can still function normally; simply install it in its intended location and continue regular use.
2.2: If charging completes in under 6 hours and the indicator shows a steady light (indicating full charge), it is advisable to continue charging for at least 6 hours.
Step 3. If the red indicator keeps flashing or the device ceases to function after use, repeat
Step 2., charging for 6-12 hours. After 3-5 charge and discharge cycles, the battery's performance and charging indicators will stabilize and return to normal.
Step 4. Ensure adherence to the above three steps to optimize the battery's performance within the device.
SUITABLE ENVIRONMENT:
Avoid using the device in extreme environments.
Such conditions could damage crucial components or impair functionality.
Solar panel: air salinity should not exceed 3%; Operational temperatures: -20ºC to +85ºC
Ni-Cd battery suitable temperature:
-10ºC to +45ºC (charging not possible beyond -10ºC to +50ºC; power output not possible beyond -20ºC to +60ºC)
Ni-MH battery suitable temperature:
Operating Temperature Range: From an impressive -18ºC to a robust +65ºC. Please note, charging is not possible beyond 0ºC to +55ºC, and power output is not available outside the -18ºC to +65ºC range
|
|
|
|
|
|
|
|
){kind=link}