| Customization: | Available |
|---|---|
| Certification: | RoHS, CE |
| Power Source: | Battery |
|
Still deciding? Get samples of US$ 8.68/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
|
|
|
Wild dogs pose a serious threat to livestock, potentially leading to significant economic losses and impacting animal welfare.
In some regions, wild dogs can severely affect wildlife and may also invade your garden, backyard, or home, causing property damage. This innovative dog repeller is your solution for keeping wild dogs at bay.
1. A powerful ultrasonic signal is emitted to deter animals. This sound is unpleasant and triggers when an animal enters the detection range, preventing habituation and enhancing the repelling effect.
2. Intense flashing lights startle animals, activating when an animal enters the range, compelling them to retreat quickly.
Button "FREQ" Position:
·13.5kHz-17.5kHz Targets small animals like mice, small rodents ...
·15.5kHz-19.5kHz Effective against larger animals such as large dogs, foxes ...
·19.5kHz-23.5kHz Designed for small dogs, cats, birds, bats ...
·Strong flashing
·Comprehensive mode: cycles through all frequencies and activates the strong flashing lights for maximum deterrence.
Battery Instructions
Step 1. For initial use, deplete the device's power (built-in batteries) until the red low-voltage indicator blinks or the device shows no response upon activation.
Step 2. Connect the device to a standard USB output using the included USB cable and charge for 6-12 hours:
2.1: Due to varying power and voltage outputs from different USB sources and battery conditions, it's normal for the red indicator to continue flashing after over 12 hours of charging. The device can operate normally even if charging is halted; simply place it in its intended location.
2.2: If the charging time is under 6 hours but the indicator lights (indicating full charge), continue charging for at least 6 hours.
Step 3. Should the red indicator persistently flash or the device cease operating after some usage, repeat
Step 2., ensuring a 6-12 hour charge for 3-5 cycles to stabilize battery characteristics, returning charging indicators to normal.
Step 4. Adhere to the three steps above to optimize the battery performance to its fullest potential.
SUITABLE ENVIRONMENT:
Avoid using the device in extreme conditions.
Failure to do so may result in damage to key components or operational failure.
Solar panel: Air salinity should not exceed 3%; Operating temperature: -20ºC ~ +85ºC
Ni-Cd battery operating temperature:
-10ºC ~ +45ºC (charging not possible above -10ºC ~ +50ºC, power output ceases above -20ºC ~ +60ºC)
Ni-MH battery applicable temperature:
-18ºC ~ +65ºC (Operating range: -18ºC ~ +65ºC. Please note, charging is not possible beyond 0ºC ~ +55ºC. Power output is unavailable beyond -18ºC ~ +65ºC)
For responsible recycling, please ensure to dispose of the batteries in accordance with your country's specific laws and regulations.
|
|
|
|
|
|
|
|
){kind=link}