| Customization: | Available |
|---|---|
| Barriers Type: | Electronic Repeller |
| Effectiveness: | Long-term |
|
Still deciding? Get samples of US$ 8.68/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
|
|
|
Wild dogs can cause severe damage and pose a threat to livestock, potentially leading to significant economic losses and impacting animal welfare.
In certain regions, wild dogs negatively affect local wildlife and may trespass into gardens, backyards, and homes, causing substantial damage. This advanced dog repeller is designed to effectively deter such intrusions.
1. Emit a powerful ultrasonic signal to deter animals. Animals find the sound unpleasant and avoid the area. The sound is activated upon detecting an animal, preventing habituation and enhancing the repellent effect.
2. Activate a strong flashing light to repel animals. This intense flash triggers when an animal comes into range, effectively scaring them away.
Button 'FREQ' Position:
·13.5kHz-17.5kHz Repels smaller animals like mice and small rodents.
·15.5kHz-19.5kHz Targets larger animals such as big dogs and foxes.
·19.5kHz-23.5kHz Effective against smaller dogs, cats, birds, and bats.
·Strong flashing
·All functions active, cycling through mode 1 to mode 3, with strong flashing enabled.
Battery Instructions
Step 1. For first-time use, deplete the built-in batteries until the red low-voltage indicator blinks or the device ceases to respond.
Step 2. Connect to a standard USB output and use the included USB cable to charge the device for 6-12 hours:
2.1: Due to variations in USB power output and battery activity, the red indicator might continue to flash even after 12 hours of charging (the device remains operational even if charging stops). Simply install the device in a standard usage scenario.
2.2: If the charging time is less than 6 hours but the indicator lights up (indicating charging completion without flashing), charge for at least 6 hours.
Step 3. Should the red indicator persistently flash or the device stop functioning after use, repeat
Step 2., charge for 6-12 hours. After 3-5 charging cycles, the battery's charge and discharge characteristics will stabilize, normalizing the charging index.
Step 4. Ensure adherence to the three steps mentioned above to optimize the battery performance within the device for maximal efficiency.
SUITABLE ENVIRONMENT:
Avoid using the device in extreme conditions.
Otherwise, essential components may become damaged or cease to function.
Solar panel: Air salinity must not exceed 3%; Operating temperature: -20ºC to +85ºC
Ni-Cd battery applicable temperature:
-10ºC to +45ºC (charging is ineffective beyond -10ºC to +50ºC, and power output ceases beyond -20ºC to +60ºC)
Ni-MH battery applicable temperature:
The Rechargeable Ultrasonic Solar Repeller for Birds and Garden Animals operates efficiently within a temperature range of -18ºC to +65ºC. Kindly note that charging is feasible only between 0ºC and +55ºC. Beyond this range, specifically over -18ºC or above +65ºC, the device is unable to supply power.
Kindly ensure that the batteries are disposed of responsibly and in full compliance with your country's specific laws and regulations on battery disposal.
|
|
|
|
|
|
|
|
){kind=link}