| Customization: | Available |
|---|---|
| Barriers Type: | Electronic Repeller |
| Effectiveness: | Long-term |
|
Still deciding? Get samples of US$ 8.68/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
|
|
|
Wild dogs pose a significant threat, causing damage and harm to livestock. This results in considerable economic losses and negatively impacts animal welfare.
In many regions, wild dogs can severely impact wildlife and may invade your garden or home, causing potential damage. This innovative dog repeller is your ultimate solution to prevent wild dog intrusions.
1. Emitting a powerful ultrasonic signal, this device effectively deters animals. The unpleasant ultrasonic sound drives them away, as they are unable to acclimate to the sound, enhancing the deterrent effect.
2. Intense flashing lights further scare away animals. The lights activate upon animal detection, effectively sending them back.
Button "FREQ" Position:
·13.5kHz-17.5kHz Targets smaller animals like mice and other small rodents.
·15.5kHz-19.5kHz Targets larger animals such as large dogs and foxes.
·19.5kHz-23.5kHz Targets smaller pets and wildlife such as small dogs, cats, birds, and bats.
·Strong flashing
·Engages all functions, cycling through modes 1, 2, and 3, with strong flashing activated.
Battery Instructions
Step 1. For initial use, deplete the device's power (built-in batteries) until the red low-voltage indicator blinks or the device shows no response.
Step 2. Charge the device using a standard USB output, with the provided USB cable, for 6-12 hours.
2.1: Due to varying USB outputs and battery activities, it is normal for the red indicator to flash after charging for over 12 hours. The device can function normally even if charging is stopped. Simply place the device in its intended environment for use.
2.2: If charging completes in under 6 hours with the indicator steady (not flashing), continue charging for a minimum of 6 hours.
Step 3. If the red indicator flashes or the device ceases to function after extended use, repeat
Step 2., charge for 6-12 hours. After 3-5 charge/discharge cycles, the battery's performance stabilizes and charging indicators normalize.
Step 4. Ensure adherence to the three steps above to fully optimize battery performance.
SUITABLE ENVIRONMENT:
Avoid using the device in extreme environmental conditions.
Such conditions may harm or disable key components of the device.
Solar panel: Ensure air salinity does not exceed 3%. Operable temperature range: -20ºC to +85ºC.
Ni-Cd battery temperature range:
-10ºC to +45ºC (Cannot charge outside -10ºC to +50ºC; cannot output power outside -20ºC to +60ºC)
Ni-MH battery temperature range:
-18ºC to +65ºC (Cannot charge outside 0ºC to +55ºC; cannot output power outside -18ºC to +65ºC)
7514fa58
|
|
|
|
|
|
|
|
){kind=link}