Product Description
Fox, coyote and wolves are predators in the area, individuals are frightened for their families, animals, as well as livestocks. Keeping these killers out of the yard can be simple and also nonlethal. With this item, you can maintain your household, livestock, as well as resources safe and also predator-free. It is important to bear in mind that many preference, smell, and sound deterients will certainly not be a permanent fix unless adjustments are made to the landscape.
This solar wolf repellent would help you to keep coyotes, foxes, and wolves out of your yard and livestock.
AOSION Solar Wolves And Animal Repeller AN-A363
Operating mode:
1. Put it on trees or other places and then turn on the switch to make the product work.
2.The switch (ON/OFF) controls the power supply of the product, and the first mode is to flash once at an interval of 10S and start the second mode after 5 cycles. The second mode is the interval of 10S flashing twice in a row, so that the cycle 5 times into the third mode; The third mode is the interval of 10S gradually light once so that the cycle 5 times and then re-enter the first mode. Repeat the cycle again and again.
Warnning(Top Important)!!!
Battery Instructions
Step 1. When using the device for the first time, please use the device till the power(built-in batteries) is to the lowest: when the red low-voltage indicator will keep blinking or there is no reaction after turn-on the device.
Step 2. Connect the device to a standard USB output out, and use the USB cable in packaging charge the device for 6-12 hours:
2.1: Because of the different power and voltage output by different USB and different activity of batteries, it's normal that the red indicator may keep flashing after charing for more than 12 hours(the device could be used normally even charging is stopped), please just install the device in a normal usage scenario and use it would be OK.
2.2: If the charging time is significantly less than 6 hours, but the indicator kept light up(showed charging finished, not flashing), please continue to charge for at least 6 hours.
Step 3. If the red indicator keeps flashing or the device stop working without any response after using for some time, please repeat Step 2., charge 6-12 hours, after 3-5 cycles of charge and discharge, the charge and discharge characteristics of the batteries would be stable and the charging index tends to be back to normal.
Step 4. Please do follow the three steps above to enable the batteries in the device to maximize their best performance.
SUITABLE ENVIRONMENT:
Do not use the device in any extreme environment.
Otherwise, important components of the device may be damaged or stop working.
| Solar panel: |
air salinity NO more than 3% |
| Applicable temperature: |
-20ºC ~ +85ºC |
| Ni-Cd battery applicable temperature: |
-10ºC ~ +45ºC (over -10ºC ~ +50ºC can't be charged, over -20ºC ~ +60ºC can't output power) |
| Ni-MH battery applicable temperature: |
-18ºC ~ +65ºC (over 0ºC ~ +55ºC can't be charged, over -18ºC ~ +65ºC can't output power) |
Please dispose the batteries according to the your country's laws and regulations.
Audited Supplier 
){kind=link}
){kind=link}