| Customization: | Available |
|---|---|
| Barriers Type: | Electronic Repeller |
| Effectiveness: | Long-term |
|
Still deciding? Get samples of US$ 8.68/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
|
|
|
Wild dogs can create fatality as well as injury to livestock which can create significant economic loss and also pet welfare influences.
In some areas, wild dogs can have serious effect on wild animals. And may likewise break into your yard, backyard, home, and also trigger shed of your home. This dog repeller would help you get rid of wild dogs.
1. A strong ultrasonic signal frightens animals.The animals avoid the area because of its unpleasant ultrasonic sound. The sound is activated when an animal enters the range. Thus, animals cannot get used to the sound, and the repulsive effect is stronger.
2. A strong flashing scared animals. The strong flashing is activated when an animal enters the range, then the animals will be scared and give back.
Button "FREQ" Position:
·13.5kHz-17.5kHz Repels animals such as mice, small rodents ...
·15.5kHz-19.5kHz Repels animals such as large dogs, foxes ...
·19.5kHz-23.5kHz Repels animals such as small dogs, cat, bird, bat ...
·Strong flashing
·All function working, sweep frequency from mode 1 -- mode 2 -- mode 3, and turn on strong flashing
Battery Instructions
Step 1. When using the device for the first time, please use the device till the power(built-in batteries) is to the lowest: when the red low-voltage indicator will keep blinking or there is no reaction after turn-on the device.
Step 2. Connect the device to a standard USB output out, and use the USB cable in packaging charge the device for 6-12 hours:
2.1: Because of the different power and voltage output by different USB and different activity of batteries, it's normal that the red indicator may keep flashing after charing for more than 12 hours(the device could be used normally even charging is stopped), please just install the device in a normal usage scenario and use it would be OK.
2.2: If the charging time is significantly less than 6 hours, but the indicator kept light up(showed charging finished, not flashing), please continue to charge for at least 6 hours.
Step 3. If the red indicator keeps flashing or the device stop working without any response after using for some time, please repeat
Step 2., charge 6-12 hours, after 3-5 cycles of charge and discharge, the charge and discharge characteristics of the batteries would be stable and the charging index tends to be back to normal.
Step 4. Please do follow the three steps above to enable the batteries in the device to maximize their best performance.
SUITABLE ENVIRONMENT:
Do not use the device in any extreme environment.
Otherwise, important components of the device may be damaged or stop working.
Solar panel: air salinity NO more than 3%; Applicable temperature: -20ºC ~ +85ºC
Ni-Cd battery applicable temperature:
-10ºC ~ +45ºC (over -10ºC ~ +50ºC can't be charged, over -20ºC ~ +60ºC can't output power)
Ni-MH battery applicable temperature:
-18ºC ~ +65ºC (over 0ºC ~ +55ºC can't be charged, over -18ºC ~ +65ºC can't output power)
Please dispose the batteries according to the your country's laws and regulations.
|
|
|
|
|
|
|
|
){kind=link}